The Complete Car Mount System The MOKIT Car Mount is an ultra-light and rigid car mount system that has been designed for use in any configuration. It is constructed from a custom made aluminum extrusion and has corrosion-proof stainless steel fittings and fasteners which make it easy to use under any conditions. The MOKIT Door Mount The door mount gives you an X, Y, and optional Z axis and can be used for interior as well as low level and wheel shots. The infinite adjustability of the mount now means that you do not have to re-rig for different camera positions. You simply slide the camera to the required position and lock it off. The Universal leveler has a quick release camera plate so no tools are required at any stage. The mount weighs less than 30 lbs. and can carry a payload in excess of 150 lbs. Included in the kit are: swivel pipe clamps, a 5/8 light spigot as well as all the necessary hooks and ratchet straps to ensure rigid tie-down. A custom road case is also available. The MOKIT Hood Mount The hood mount can be used on the hood, the roof, the rear and even inside of the vehicle. It has 3 sliding rails of different lengths that can be used individually or combined for a total length of 10ft. It has X, Y and Z axis and, in conjunction with the sliding base plate and the universal leveler, allows infinite positioning of the camera with a minimum amount of effort. The kit weighs less than 30 lbs., and is able to carry a payload in excess of 150 lbs. Included in the kit are - a sliding 5/8 light spigot and a double suction cup with a spigot, as well as all necessary hooks and ratchet straps to ensure rigid tie-down. A custom road case is also available.